Setup Your Sensor

Setup Your Sensor

Initial Setup

The purpose of these instructions is to connect your Flexia Reformer to your home wifi so it can communicate to your tablet during class. You will be connecting to the 'FlexiaReformer’ network via your tablet only once at initial setup - you will NOT need to repeat this procedure every time you work out. To ensure smooth data transfer, you must operate your tablet on the same home wifi network that you connect your reformer to.

Step 1: Start with the carriage on the rails

Run the included power cable under the Carriage of the Reformer.

Step 2: Connect Power

Under the carriage, locate the computer enclosure towards the head of the carriage. Connect the DC Power Supply Plug to the DC Power Supply Receptacle.

Step 3: Connect to your Reformer to complete

The Reformer will boot in Setup Mode. Using your phone, tablet, or laptop, connect to the Wireless Network ‘FlexiaReformer’.

Note: Once the power supply is connected the computer will emit a red light confirming it has power. If you do not see a red light, please check that the power supply plug is properly secured and there is power running to the unit.

Step 4: Open the Configuration Panel

A window should immediately open showing the setup page. If a window does not open, Go to: http://setup.flexiapilates.com.

Note: http://setup.flexiapilates.com is a webpage hosted on the reformer. You must be connected to the wireless network ‘FlexiaReformer’. If you click on this link within a traditional browser, while not connected to ‘FlexiaReformer’, it may prompt that the site cannot be reached.

Step 5: Connect your Reformer to your Home Wifi

Select your preferred wifi network for the Reformer to use. Enter the network password, if required. Select Connect.

What is happening behind the scenes?

Your reformer will record the motion of your reformer whenever you take a class in the Flexia Online Studio. Your reformer will send that data to the Online Studio. We will process the data that your reformer captures and use it to develop your Movement Quality Score (MQS) and report other useful metrics to you.

What happens next?

We analyze your performance and generate reports that will be released within the Flexia Online Studio.

These include reports like:
  • Personalized Spring Recommendations.
  • MQS Reports that explain your progress.
  • Class recommendations based on your needs.

Troubleshooting

If your phone or other handheld device fails to connect to the ‘FlexiaReformer’ network, you may need to disable your device’s mobile data connection by enabling Airplane Mode before connecting to ‘FlexiaReformer’.

Video Connecting Sensor to Wifi

 


    • Related Articles

    • How To Know My Sensor is Connected

      You've connected your sensor to your wifi network but aren't sure how to verify its connection. If you’re not sure how to check if your sensor is connected to the online studio there are two places you can check. Option 1: Log-in to your Online ...

    • How to connect your Sensor to Your Wifi

      Click the video below to follow the steps to connect your sensor

    • What do the red and green lights mean on the sensor?

      Currently, red and green lights don't mean your sensor is connected or disconnected. Red and green lights on the sensor unit don't signal a connection or not to the online studio or wifi. If you're struggling to connect your sensor, please email ...

    • My Reformer Won't Connect to my Wifi

      Before reaching out to Customer Support, please try the solutions below. The first solution to try is to see if your reformer has connected without us seeing. Sometimes the reformer connection is so fast that the setup wizard does not catch that the ...

    • Do I need to plug in my reformer?

      Our reformer will work like a standard studio-grade reformer without plugging it in. However, if you want to use our AI technology to take our sensor-enabled classes on the Online Studio, you will need to plug our reformer into a power source.