How To Know My Sensor is Connected

How To Know My Sensor is Connected

You've connected your sensor to your wifi network but aren't sure how to verify its connection.

If you’re not sure how to check if your sensor is connected to the online studio there are two places you can check.


Option 1: 

  • Log-in to your Online Studio account
  • Click the Photo Icon in the top right-hand corner 
  • Click My Reformer
  • Check that there is a Preferred Reformer, and that the status is "connected"
  • If no Preferred Reformer exists, choose one from the list below.

Option 2:

  • Log-in to your Online Studio account
  • Go to the Collections option at the top of the studio menus
  • Click: Feature Sensor Enabled Classes
  • Choose a Feature Sensor Enabled Class. We recommend Total Arms
  • Once you’ve started the class, check the bottom right-hand corner for “connected”

    • Related Articles

    • What do the red and green lights mean on the sensor?

      Currently, red and green lights don't mean your sensor is connected or disconnected. Red and green lights on the sensor unit don't signal a connection or not to the online studio or wifi. If you're struggling to connect your sensor, please email ...

    • Setup Your Sensor

      Initial Setup The purpose of these instructions is to connect your Flexia Reformer to your home wifi so it can communicate to your tablet during class. You will be connecting to the 'FlexiaReformer’ network via your tablet only once at initial setup ...

    • How to connect your Sensor to Your Wifi

      Click the video below to follow the steps to connect your sensor

    • My tablet or iPad won't connect to my reformer after my laptop connected.

      Troubleshoot switching between connected devices. When your reformer is not in use, it should automatically switch between your devices. The Flexia Reformer cannot connect to two devices simultaneously, but you can switch between devices. However if ...

    • My Reformer Won't Connect to my Wifi

      Before reaching out to Customer Support, please try the solutions below. The first solution to try is to see if your reformer has connected without us seeing. Sometimes the reformer connection is so fast that the setup wizard does not catch that the ...